Skip to content
Aurora ShieldRoofing Contractors 24/7Call the roof line(754) 226-1055

Roof repair

Skylight repair and installation in Pembroke Pines, FL

A skylight that drips in every storm, or a cloudy dome that has cracked in the sun, turns a bright room into a source of stains and worry.

  • Open 24/7
  • Based on Hiatus Road
  • HVHZ-rated materials
Roofer installing a new impact rated skylight into a concrete tile roof on a South Florida home on a clear day
Answered 24/7
  • Real person on the line
  • Visit booked on the same call
  • Photos of what we find

Quick answer

Skylight repair fixes leaks around the curb, failed flashing, and cracked or yellowed domes, while installation adds a new impact rated skylight or tubular daylight unit. Call when you see drips, condensation stains or cracks. Typical repairs run $445 to $1,680, and new units cost more depending on size. Call (754) 226-1055, answered 24/7.

Skylight repair & installation around Pembroke Pines

Many Pembroke Pines homes from the 1980s and 1990s have acrylic dome skylights over kitchens and bathrooms. After decades of South Florida sun, the domes yellow and crack, and the curb flashing around them rusts or separates from the tile. Most skylight leaks actually come from the flashing and curb, not from the dome itself, which is why the fix usually starts on the roof around the unit.

We repair skylights by lifting tile around the curb, replacing underlayment and pan flashing, and resetting the existing unit or a new one. In the HVHZ, replacement skylights need Miami-Dade NOA approval and impact resistance. Tubular daylight devices are a smaller option for halls and closets, with a simple roof flashing that suits both tile and shingle roofs.

When to call

Signs it is time for skylight repair & installation

Drips around the frame

Water dripping at the skylight edge during rain usually means the curb flashing or the seal to the roof has failed.

Yellowed or cloudy dome

Acrylic domes that have turned yellow or hazy are brittle from UV exposure and can crack in the next storm.

Cracks in the dome

Even small cracks let water in and weaken the dome's ability to resist wind and flying debris.

Stains on the light well

Brown stains on the drywall shaft below a skylight point to a leak or ongoing condensation that needs attention.

Rotted curb wood

Soft or dark wood around the skylight curb shows long term water entry that will soon spread into the decking.

Heat pouring through

A room that overheats under an old single layer dome may benefit from a modern, tinted, insulated skylight unit.

How the job runs

What happens on your roof

  1. 01

    Inspect skylight and curb

    We check the dome, frame, curb wood and flashing from inside and on the roof, and photograph any cracks, rot or gaps.

  2. 02

    Lift covering around the unit

    Tile or shingles around the curb are carefully removed and stacked, exposing the old flashing and the underlayment beneath.

  3. 03

    Rebuild curb and underlayment

    Rotted curb wood is replaced, and new self-adhered underlayment is wrapped up the curb sides for a continuous water barrier.

  4. 04

    Install flashing and unit

    New pan and head flashing are installed, then the existing unit is resealed or a new NOA approved, impact rated skylight is fastened down.

  5. 05

    Reset roof and finish

    Tile or shingles are reset around the curb, the interior well is checked, and the skylight is water tested before we leave.

Close up of new lead pipe boot flashing being sealed on a tile roof
A typical day on a roof repair job in Broward County.

Local factors that change this job

Under Broward's HVHZ rules, skylights are treated as openings in the roof and must carry Miami-Dade NOA or equivalent approval, including impact resistance. That rules out many big box store units. Installing a new skylight or enlarging an opening needs a permit. Strong UV and high summer heat age acrylic domes quickly here, and summer storms test every curb seal. On tile roofs, the curb and pan flashing must be tall enough to clear the thick tile profile.

Your options

Choices worth understanding first

Reseal and reflash existing unit

If the dome is sound and the frame is solid, new flashing and underlayment around the curb often fix the leak at the lowest cost.

Impact rated replacement

New NOA approved skylights with laminated or impact glazing resist wind borne debris, and low E coatings cut heat. They cost more but meet HVHZ rules.

Tubular daylight device

A small reflective tube brings daylight into halls and baths through a compact dome and simple flashing. It suits tile roofs and is less prone to leaks.

Removing a skylight

If you no longer want the skylight, we can frame in the opening, deck it, install underlayment and tile to match, and leave the ceiling ready to patch.

Typical cost

What skylight repair & installation costs in Pembroke Pines

Typical South Florida range$445 to $1,680per skylight repair
Reflash and reseal existing skylight$445 to $1,060
Curb rebuild with new flashing$780 to $1,680
New impact rated skylight installed$1,940 to $4,370
Tubular daylight device installed$865 to $1,590

Cost depends on skylight size and type, curb condition, the roof covering around it, flashing replacement, and whether you repair the existing unit or install a new NOA approved one. New impact rated skylights add product cost, and interior drywall work is separate. The final price is set after an on-roof look and given in writing. Compare every service on the roofing price guide.

Questions

Skylight repair & installation questions we hear

Yes. In the HVHZ, skylights count as roof openings and must have Miami-Dade NOA or equivalent approval, which includes impact resistance. Many units sold at home stores are not approved for use here. A permit is also needed to install a new skylight, and we confirm the product approval before ordering anything.

That is often condensation. Warm, humid indoor air hits the cooler dome and drips back down, especially on single layer acrylic domes. Better ventilation in the room helps, and a modern double glazed unit reduces it. We check the flashing too, since a slow leak can look very similar from below.

Yes. We remove the unit and curb, frame and deck the opening, install new underlayment, and tile or shingle over it to match the roof. Inside, the ceiling opening needs drywall patching and paint, which a drywall finisher can handle once the roof side is closed and watertight.

For a dark hallway, laundry room or bath, it can be. Tubular units have small domes and flashing kits designed for tile, so they leak less often than large skylights. They do not give a view of the sky, but they bring in a surprising amount of daylight without adding much heat.

Related work

Often booked with this service

Roof Flashing Repair

Most roof leaks start where the roof meets a wall, a valley or a vent pipe, and the metal flashing there has rusted, cracked or pulled loose.

See this service

Roof Leak Repair

Water dripping into a bedroom during an afternoon downpour usually enters several feet from the stain, so patching the obvious spot rarely stops the leak for good.

See this service

Tile Roof Repair

Cracked, slipped or loose tile leaves the underlayment open to sun and rain, and on a South Florida roof that exposed spot is where the next leak starts.

See this service

More roof repair services

Where we do this work most

Leak, storm damage or a roof that is simply getting old?

Call the roof line any hour. A real person answers, asks what you are seeing and sets the next step.

Roof trouble? Answered 24/7Call (754) 226-1055