Roof repair
Fascia and soffit repair in Pembroke Pines, FL
Rotted fascia boards and sagging soffit panels let rain, rats and wasps into the attic, and they weaken the edge where your roof and gutters attach.
- Open 24/7
- Based on Hiatus Road
- HVHZ-rated materials

- Real person on the line
- Visit booked on the same call
- Photos of what we find
Quick answer
Fascia and soffit repair replaces rotted wood fascia boards along the roof edge and damaged soffit panels under the overhang, plus the drip edge that protects them. You need it when paint peels, wood feels soft, or animals get into the attic. Typical costs run $435 to $2,170. Call (754) 226-1055, answered 24/7.
Fascia & soffit repair around Pembroke Pines
Most Pembroke Pines homes have wood fascia boards at the roof edge, painted to match the stucco, with vinyl or aluminum soffit vented underneath. Humid air and wind driven rain soak the wood wherever paint cracks or drip edge is missing. Rot usually starts at corners, at gutter joints, and below valleys, where water runs off the roof in a concentrated stream.
Replacing fascia properly means lifting the edge row of tile or shingles enough to remove the rotted board, checking the rafter tails behind it, and installing new treated or composite fascia primed on all sides. We then reinstall drip edge with HVHZ fastening, and replace soffit panels so the attic keeps the airflow it needs.
When to call
Signs it is time for fascia & soffit repair
Soft or crumbling wood
A screwdriver that sinks easily into fascia wood shows rot that will spread to the rafter tails if left in place.
Peeling paint at the edge
Paint blistering on the fascia while the stucco looks fine often means the wood behind it is soaking up water.
Sagging soffit panels
Soffit that droops or hangs open lets animals in and is often a sign of water damage in the overhang above.
Animals in the attic
Scratching at night or droppings near the eaves usually trace back to a gap in the soffit or rotted fascia corners.
Gutters pulling away
Gutters that tilt or pull off the house often lose their grip because the fascia behind them has rotted.
Water stains on soffit
Brown stains on soffit panels mean water is coming over or behind the fascia, usually because drip edge is missing or short.
How the job runs
What happens on your roof
- 01
Inspect the full roof edge
We walk the perimeter, probe fascia boards, check soffit panels and vents, and note gutter attachment points and rafter tail condition.
- 02
Lift the edge covering
The first row of tile or shingles and the drip edge are carefully lifted so the old fascia can come off without damaging the roof.
- 03
Replace rotted wood
Rotted fascia is removed, rafter tails are repaired or sistered if needed, and new primed treated or composite fascia is fastened in place.
- 04
Reinstall drip edge and soffit
Drip edge is fastened over the new fascia to HVHZ spacing, and damaged soffit is replaced with vented panels matched to the existing style.
- 05
Paint, seal and clean up
New fascia is caulked and painted to match, gutters are reattached if present, and all debris is cleared from beds and walkways.

Local factors that change this job
In the humid Broward climate, wood fascia that loses its paint can rot within a few rainy seasons. Missing or short drip edge, common on older tile roofs in Pembroke Pines, sends water straight onto the board. Soffit vents feed attic airflow, which helps hold down attic heat through the long summer. Roof rats and wasps are common here and look for any gap at the eaves. Drip edge fastening falls under HVHZ rules, so we install it to that standard on every repair.
Your options
Choices worth understanding first
Pressure treated wood fascia
Treated pine resists rot better than untreated lumber and holds paint well when primed on all sides. It matches the look of most original South Florida fascia.
PVC or composite fascia
Cellular PVC boards will not rot and need little upkeep. They cost more up front and expand in heat, so joints need proper spacing and fastening.
Aluminum fascia wrap
Bent aluminum can cover sound wood fascia for low maintenance. It should never go over rotted wood, which keeps decaying, hidden inside the wrap.
Vented versus solid soffit
Vented soffit lets air into the attic, while solid panels suit spots where vents are not needed. Most homes need a balance of intake vents along the eaves.
Typical cost
What fascia & soffit repair costs in Pembroke Pines
| Fascia board replacement, per 10 feet | $435 to $865 |
| Soffit panel replacement, per 10 feet | $265 to $590 |
| Rafter tail repair, each | $140 to $310 |
| Drip edge replacement with fascia, per 20 feet | $310 to $640 |
Price depends on how many linear feet of fascia are rotted, whether rafter tails need repair, the type of fascia and soffit you choose, how much roof edge must be lifted, paint matching, and gutter removal and reinstall. A single corner costs much less than a full side of the house. The final price is set after an on-roof look. Compare every service on the roofing price guide.
Questions
Fascia & soffit repair questions we hear
On tile roofs, fascia sits under the edge tiles and drip edge, so the roof edge has to be lifted and reset correctly. A roofer can handle the drip edge and tile without causing leaks. Carpentry alone often leaves the drip edge loose or missing, which is usually what rotted the board in the first place.
Roof rats climb trees, wires and walls easily, then chew into soft spots at soffit corners, loose vent panels or rotted fascia. Replacing damaged soffit and fascia closes the gap, and trimming branches away from the roof helps too. A pest company can handle trapping once the entry points are sealed.
We do not recommend it. Wrapping hides the rot but does not stop it, and the wood keeps decaying along with the rafter tails behind it. Aluminum wrap works well over sound wood. Rotted sections should be replaced first, and then you can wrap them if you prefer the low maintenance finish.
Every 5 to 7 years is a good guide for painted wood fascia here, sooner on the side that takes the afternoon sun. Watch for cracking or peeling paint, especially at joints and corners. Keeping the paint film sealed is the cheapest way to prevent rot and the larger repair that follows it.
Related work
Often booked with this service
Gutter Installation & Repair
Summer downpours overflow your gutters, pour off the roof edge and soak the fascia, the stucco walls and the soil right against your foundation.
See this serviceRoof Repair
A small roof problem in South Florida rarely stays small, because every afternoon storm pushes more water past the cracked tile, lifted shingle or tired flashing you cannot see.
See this serviceRoof Maintenance & Hurricane Prep
Hurricane season is coming and you know there are loose tiles, a lifted flashing and clogged gutters that the first big storm will find.
See this serviceMore roof repair services
- Roof Repair
- Leak Repair
- Tile Repair
- Shingle Repair
- Flat Roof Repair
- Metal Roof Repair
- Flashing Repair
- Skylights
- Mansard Repair
- Truss & Rafter Repair
Where we do this work most
Leak, storm damage or a roof that is simply getting old?
Call the roof line any hour. A real person answers, asks what you are seeing and sets the next step.