New roofs & replacement
5V crimp metal roofing in Pembroke Pines, FL
You want a metal roof with Old Florida character at a lower price than standing seam, for a home, porch, cabana or detached workshop.
- Open 24/7
- Based on Hiatus Road
- HVHZ-rated materials

- Real person on the line
- Visit booked on the same call
- Photos of what we find
Quick answer
5V crimp is a metal panel with five V-shaped ribs, fastened with exposed screws through the panel into the deck. It costs less than standing seam, installs quickly and has a classic Florida look, though the fasteners need checking every few years. Typical South Florida installs run $11.90 to $18.70 per square foot. Call (754) 226-1055 any hour for an on-roof look.
5V crimp metal roofing around Pembroke Pines
5V crimp has been on Florida roofs for generations, from Cracker-style farmhouses to Key West cottages. Each panel covers about 24 inches and has five crimped ribs, and neighboring panels overlap at the outer rib. In Pembroke Pines it shows up on detached garages, pool cabanas, porches and full homes where owners want metal durability without the cost of a concealed-clip system.
The tradeoff is exposed fasteners. Every screw goes through the panel, sealed by a rubber washer, and those washers age under UV and thermal movement. On a well-built 5V roof, the panels last decades while the screws are checked and replaced on a maintenance schedule. Correct HVHZ fastener spacing and stainless or coated screws make the biggest difference in Broward.
When to call
Signs it is time for 5V crimp metal roofing
Outbuilding needs a roof
A garage, workshop, shed or cabana needs a durable roof that matches the house without the price of a full standing seam system.
Old Florida home style
Your home's Key West or farmhouse design calls for the ribbed, classic look that 5V panels have given Florida roofs for decades.
Metal on a tighter budget
You want metal over shingle, standing seam pricing is out of range, and your HOA allows exposed-fastener panels.
Rusted older panels
Existing corrugated or 5V panels show rust at laps and screw holes, and patching no longer stops the drips inside.
Leaks at screw heads
Water spots line up with the fastener rows, a sign the old washers have cracked and the roof needs refastening or new panels.
Short install window
Panels go on quickly over a prepared deck, which suits small structures and projects that need to close out between storm systems.
How the job runs
What happens on your roof
- 01
Layout and approvals
We measure the roof, confirm the 5V panel and fastener NOA for your wind exposure, and get HOA approval where your community requires it.
- 02
Tear-off and solid deck
The old covering is removed, plywood is repaired or added, and the deck is re-nailed so every panel screw bites into solid wood.
- 03
Underlayment and dry-in
Self-adhered underlayment covers the deck and passes the dry-in inspection, since the panels shed water but the underlayment keeps the house dry.
- 04
Panel install and fastening
Panels are laid with proper side laps and fastened with sealing-washer screws on the approved spacing, tighter at the edges and corners.
- 05
Trim, ridge and final
Ridge cap, eave and rake trim and closure strips go on, the final inspection is completed, and the yard is swept for metal shavings.

Local factors that change this job
5V crimp panels on homes in the HVHZ need a Miami-Dade NOA that lists the fastener type, spacing and deck requirements, and inspectors check screw patterns in the perimeter zones. Broward's humidity and occasional salt air speed up fastener corrosion compared with drier climates, so stainless or coated screws matter here. Many Pembroke Pines HOAs treat exposed-fastener metal differently from standing seam, so read the guidelines first. Detached sheds and cabanas may follow a simpler permit path, but they still need approved products.
Your options
Choices worth understanding first
Galvalume 5V panels
Coated steel panels that suit most inland Pembroke Pines homes and outbuildings. The lowest-cost metal option, available in bare silver or painted finishes.
Aluminum 5V panels
A rust-free option for homes with salt exposure. Costs more than Galvalume but avoids red rust at cut edges, screw holes and side laps.
Painted panel finishes
Factory paint finishes in white, gray, green or bronze. White and light colors reflect more sun and keep porches and cabanas cooler underneath.
Stainless fastener upgrade
Stainless steel screws with long-life washers resist the corrosion that shortens standard fasteners, stretching the time between refastening jobs on exposed roofs.
Typical cost
What 5V crimp metal roofing costs in Pembroke Pines
| Galvalume 5V crimp, installed | $11.90 to $15.40 per sq ft |
| Aluminum 5V crimp, installed | $14.80 to $18.70 per sq ft |
| Refasten an existing 5V roof | $1.35 to $2.60 per sq ft |
| Plywood deck over open framing | $4.70 to $8.20 per sq ft |
Galvalume panels sit at the low end and aluminum at the top. Small structures cost more per square foot because setup, trim and permit costs spread over less area. Deck repairs, adding plywood over open rafters and stainless fastener upgrades add to the price. The final price is set after an on-roof look and a measured panel count. Compare every service on the roofing price guide.
Questions
5V crimp metal roofing questions we hear
Plan on checking fasteners every 3 to 5 years and refastening, usually with oversized screws in the same holes, somewhere around years 12 to 20. Sun, heat and panel movement wear out the washers. Stainless screws with long-life washers stretch that interval. A quick look after each hurricane season catches backed-out screws early.
No. Corrugated panels have continuous rounded waves, while 5V has flat sections between five V-shaped ribs. 5V lies flatter, looks cleaner on homes and has its own HVHZ-approved fastening schedules. Corrugated is more common on barns and agricultural buildings, and fewer corrugated products carry approvals for homes in Broward.
On a home or attached porch in the HVHZ, approved systems generally call for a solid plywood deck and underlayment, not panels screwed to open purlins. Some detached sheds may use purlin-mounted panels if the product approval allows it. We check the NOA for your specific structure before pricing the job.
Usually 25 to 40 percent less installed, because the panels are simpler and go on faster with no clips or seaming. Over 30 years the gap narrows somewhat, since exposed fasteners need periodic replacement. For outbuildings and budget-focused reroofs, 5V is often the better value, while many owners choose standing seam for the main house.
Related work
Often booked with this service
Metal Roof Repair
Metal roofs handle South Florida wind well until a fastener backs out, a seam opens, or salt air starts to rust a cut edge, and then leaks follow quickly.
See this servicePatio & Porch Roofing
Your back patio roof leaks where it meets the house, sags in the middle, or you want a covered outdoor space to escape the summer sun.
See this serviceRoof Inspection
You are not sure what shape your roof is really in after another storm season, and a small stain or loose tile has you wondering what else is hiding.
See this serviceMore new roofs & replacement services
- Roof Replacement
- Concrete Tile
- Clay Barrel Tile
- Shingle Roofing
- Standing Seam Metal
- New Construction
- Patio & Porch Roofs
- Mobile Home Roofs
Where we do this work most
Leak, storm damage or a roof that is simply getting old?
Call the roof line any hour. A real person answers, asks what you are seeing and sets the next step.