Skip to content
Aurora ShieldRoofing Contractors 24/7Call the roof line(754) 226-1055

Commercial & HOA

Commercial roofing in Pembroke Pines, FL for low slope buildings

A leaking roof over a retail bay, office or warehouse costs you inventory, tenant goodwill and business days, so repairs need to happen fast and around the people inside.

  • Open 24/7
  • Based on Hiatus Road
  • HVHZ-rated materials
Roofers installing white TPO membrane on a low slope shopping plaza roof with rooftop AC units in Pembroke Pines
Answered 24/7
  • Real person on the line
  • Visit booked on the same call
  • Photos of what we find

Quick answer

Commercial roofing covers repair, restoration and replacement of low slope roofs on offices, plazas, warehouses and small industrial buildings, using TPO, modified bitumen, built up roofing and coatings. Call when leaks affect tenants or the roof is aging. Typical repairs run $780 to $3,940, and replacements are priced per square foot. Call (754) 226-1055, answered 24/7.

Commercial roofing around Pembroke Pines

Pembroke Pines has a wide mix of commercial property, from shopping plazas along Pines Boulevard and Flamingo Road to medical offices and light industrial buildings. Most sit under low slope roofs with parapets, scuppers and rooftop AC units, where ponding water and service traffic wear the membrane fast. A small leak near a rooftop unit can damage ceilings and stock in an occupied space.

Aurora Shield works around tenants, scheduling noisy or odorous work early or after hours, keeping access paths clear, and coordinating with property managers. For aging roofs, we use core samples and moisture readings to decide between repair, restoration with a coating, or a full tear off, so you can plan capital spending with real data instead of guesses.

When to call

Signs it is time for commercial roofing

Leaks over occupied space

Ceiling tiles stained or falling in a tenant space mean the membrane has failed and water is reaching the insulation.

Ponding near drains

Water standing for days near drains or around AC curbs points to clogged drains, a sagging deck or lost slope.

Split seams and blisters

Open laps, blisters and splits in TPO or modified bitumen let water spread under the membrane across large areas.

Loose coping or edge metal

Coping that rattles or lifts on parapet walls can let wind peel the membrane back during a storm.

Wear around rooftop units

Mechanical contractors often puncture or scuff the membrane around AC curbs and lines during service visits.

Rising cooling costs

A dark or worn roof surface absorbs more heat, which pushes up air conditioning costs in the space below.

How the job runs

What happens on your roof

  1. 01

    Survey and moisture check

    We walk the roof, map leaks, check drains, scuppers, coping and curbs, and use core cuts or moisture readings to find wet insulation.

  2. 02

    Report and options

    You get a written report with photos and options for repair, coating restoration or replacement, with costs for each path.

  3. 03

    Tenant and access plan

    We set a schedule with the property manager, plan crane or ladder access, and prepare notices for tenants about work days and hours.

  4. 04

    Install or repair the system

    Crews repair or install membrane, insulation, flashing, coping and edge metal using HVHZ approved systems and the permits the job requires.

  5. 05

    Closeout and maintenance plan

    We walk the finished roof with you, provide photos and documents, and recommend a maintenance schedule for drains and penetrations.

Roofing crew working along the parapet of a low rise South Florida office building
A typical day on a commercial & hoa job in Broward County.

Local factors that change this job

Commercial roofs in Broward fall under the HVHZ, which requires Miami-Dade NOA or equivalent approved systems and specific perimeter and corner fastening for wind uplift. Replacement work needs a permit and inspections. Summer storms test drains and scuppers on flat buildings, and high UV breaks down membrane surfaces quickly. Many plazas and offices in Pembroke Pines were built from the 1980s to the 2000s and are now on a second or third roof, often with wet insulation from old leaks hidden below.

Your options

Choices worth understanding first

TPO single ply

TPO is a white heat welded membrane that reflects heat and handles ponding better than many older systems. It is a common choice for offices and retail buildings in South Florida.

Modified bitumen

Multi ply modified bitumen is tough and handles foot traffic around rooftop equipment well. It suits buildings with frequent mechanical service and complex flashing details.

Silicone coating restoration

Where the existing roof is mostly dry and sound, a silicone coating can extend its life and reflect heat without the cost and disruption of a full tear off.

Tapered insulation retrofit

Adding tapered insulation during replacement creates slope toward the drains, reducing ponding and improving energy efficiency at the same time.

Typical cost

What commercial roofing costs in Pembroke Pines

Typical South Florida range$780 to $3,940per repair visit
Leak repair at a seam or curb$780 to $1,690
Drain or scupper rebuild$940 to $2,380
Silicone coating restoration, per sq ft$3.85 to $6.40
TPO replacement with insulation, per sq ft$9.70 to $15.60

Commercial cost depends on roof size, membrane type, how much insulation is wet, the number of rooftop units and penetrations, parapet and coping work, access, and scheduling around tenants. Replacements and coatings are priced per square foot after a survey. The final price is set after an on-roof look and laid out in a written proposal. Compare every service on the roofing price guide.

Questions

Commercial roofing questions we hear

Yes, in most cases. We schedule work by section, keep noisy tasks and adhesive use outside peak hours where possible, protect entries, and give the property manager notices to share with tenants. For sensitive spaces like medical offices, we plan around their hours and the location of their air intakes.

Often, if the existing roof is mostly dry. A moisture survey shows how much insulation is wet. If only small areas are wet, those can be replaced and the roof coated for a fraction of tear off cost. If large areas are saturated, a coating would trap water and replacement makes more sense.

We do. In Broward, commercial reroofs need a permit and inspections, with approved product documentation for the HVHZ. We prepare the permit package with system approvals and wind uplift details, schedule the inspections, and coordinate access for the inspector with your property manager.

At least two inspections a year, ideally before and after hurricane season, plus checks after major storms. Drains and scuppers should be cleared regularly, and areas around rooftop units checked after any mechanical service. Catching small seam or flashing problems early prevents large wet insulation repairs later.

Related work

Often booked with this service

TPO Roofing

Your flat roof bakes in the sun, ponds water for days after storms, and the old gravel or rolled roofing is cracking at every seam.

See this service

Silicone Roof Coating

Your flat or metal roof is worn but still dry underneath, and you want to add years of life without paying for a full tear-off.

See this service

Flat Roof Repair

Water sitting on a flat roof for days after a storm finds every weak seam and drain gap, then shows up as a stain over the Florida room.

See this service

More commercial & HOA services

Where we do this work most

Leak, storm damage or a roof that is simply getting old?

Call the roof line any hour. A real person answers, asks what you are seeing and sets the next step.

Roof trouble? Answered 24/7Call (754) 226-1055