Skip to content
Aurora ShieldRoofing Contractors 24/7Call the roof line(754) 226-1055

Flat roofs & coatings

Silicone roof coating in Pembroke Pines, FL

Your flat or metal roof is worn but still dry underneath, and you want to add years of life without paying for a full tear-off.

  • Open 24/7
  • Based on Hiatus Road
  • HVHZ-rated materials
Roofer spraying bright white silicone coating onto a flat commercial roof in South Florida, rooftop units, clear blue sky
Answered 24/7
  • Real person on the line
  • Visit booked on the same call
  • Photos of what we find

Quick answer

Silicone roof coating is a liquid-applied membrane sprayed or rolled over an existing roof to form a continuous, reflective, waterproof layer. It suits sound TPO, modified bitumen, built-up and metal roofs, and handles ponding better than acrylic. Typical South Florida costs run $3.85 to $7.40 per square foot. Call (754) 226-1055 24/7 for an on-roof look.

Silicone roof coating around Pembroke Pines

A silicone coating is a restoration, not a new roof. It works when the existing membrane and insulation are mostly dry and well attached, and it fails when it is used to hide a wet, rotten roof. That is why every coating job starts with a moisture check. On the right roof, silicone adds a bright white, UV-stable layer that can delay replacement for 10 to 15 years.

Silicone suits Pembroke Pines better than many coatings because it does not break down under ponding water, which every flat roof here deals with after summer storms. It stays flexible through heat cycles and reflects most of the sun's energy. The tradeoff is that silicone attracts dust, and future recoats need silicone again, since few other materials bond to it.

When to call

Signs it is time for silicone roof coating

Aging but dry flat roof

The membrane is chalky and worn, but cores and scans show the insulation underneath is still dry and the deck is sound.

Rusting metal roof surface

Exposed-fastener metal shows surface rust and loose screws, and a coating system can seal fasteners and laps after rust treatment.

Avoiding a full tear-off

You want to extend roof life without the cost, noise and disruption of removing the old roof down to the deck.

Ponding you cannot regrade

Some minor ponding remains, and silicone tolerates standing water better than acrylic coatings that soften and wash away.

High cooling costs below

A bright white silicone surface reflects much of the sun, lowering roof temperature over offices, warehouses and Florida rooms.

Spreading out capital costs

A building owner needs to spread spending over time, and a coating can delay replacement while keeping the roof watertight.

How the job runs

What happens on your roof

  1. 01

    Moisture survey and cores

    We scan and core the roof to confirm the insulation is dry, mark any wet areas for replacement, and check adhesion with small test patches.

  2. 02

    Repair and replace wet areas

    Wet insulation and damaged membrane are cut out and replaced, blisters are opened and patched, and loose seams are reattached.

  3. 03

    Power wash and prime

    The roof is pressure washed to remove dirt, chalk and algae, and primer is applied wherever the existing membrane needs it for adhesion.

  4. 04

    Reinforce seams and details

    Seams, fasteners, drains and penetrations get silicone with polyester fabric or seam tape so the weak points are built up first.

  5. 05

    Spray or roll the coating

    Silicone is applied in one or two coats to the specified dry mil thickness, checked with a gauge at points across the whole roof.

Bright white silicone coating being rolled over an older flat roof under strong sun
A typical day on a flat roofs & coatings job in Broward County.

Local factors that change this job

In the HVHZ, a coating used as a roof restoration must be part of an approved system, and Broward building departments may require a permit depending on scope. A coating does not change the age of the underlying roof on a wind mitigation form. Summer afternoon storms mean application is scheduled for dry mornings, since silicone needs time to skin over before rain. Pembroke Pines townhome and commercial roofs with sound membranes are the best candidates, and wet roofs are not candidates at all.

Your options

Choices worth understanding first

High-solids silicone

A thick, high-solids coating that builds the required mil thickness in fewer passes. Handles ponding water and keeps its flexibility through years of Florida heat.

Fabric-reinforced details

Polyester fabric embedded in silicone at seams, drains and transitions adds strength where roofs move most and where leaks usually start.

Metal roof rust treatment

Rust is wire-brushed and primed, fasteners are sealed with silicone or fastener caps, and laps are taped before the full coating goes on.

Granule-embedded walkways

Granules broadcast into the wet silicone add grip and wear protection along the paths technicians walk to reach rooftop AC units regularly.

Typical cost

What silicone roof coating costs in Pembroke Pines

Typical South Florida range$3.85 to $7.40per square foot applied
Moisture survey and cores$385 to $1,140 per roof
Power wash and primer$0.45 to $1.10 per sq ft
Silicone coating, applied$2.90 to $5.60 per sq ft
Seam and detail reinforcement$0.60 to $1.35 per sq ft

The amount of repair before coating is the biggest variable, especially wet insulation replacement. Coating thickness, primer needs, seam reinforcement, the number of penetrations and roof access also change the total. Metal roofs with heavy rust need more prep. A coating is only priced once the roof passes a moisture check, and the final price is set after an on-roof look. Compare every service on the roofing price guide.

Questions

Silicone roof coating questions we hear

It can seal small leaks at seams, fasteners and pinholes on a roof that is otherwise sound. It cannot fix a roof with wet insulation, a rotted deck or failed flashing at the walls, because water keeps getting in underneath. We fix those problems first and then coat, or tell you plainly when replacement is the better choice.

Usually not. Insurers and wind mitigation inspectors generally go by the age and type of the underlying roof covering, not the coating. Some carriers view a restoration differently, but we cannot speak for any policy. We give you the scope, photos and product information so you can ask your agent directly.

For flat roofs in Pembroke Pines, silicone usually wins because it does not soften or wash off under ponding water and holds up to intense UV. Acrylic costs less and works on steeper, well-draining roofs. Silicone collects more dirt and needs silicone for future recoats, so we weigh drainage, budget and future plans together.

Most silicone systems are designed for 10 to 20 years, depending on the thickness applied. A thicker coat lasts longer and can often be cleaned and recoated at the end of its life instead of being torn off. Manufacturer warranties on coating systems vary by thickness and depend on proper application.

Related work

Often booked with this service

Flat Roof Repair

Water sitting on a flat roof for days after a storm finds every weak seam and drain gap, then shows up as a stain over the Florida room.

See this service

Metal Roof Repair

Metal roofs handle South Florida wind well until a fastener backs out, a seam opens, or salt air starts to rust a cut edge, and then leaks follow quickly.

See this service

Commercial Roofing

A leaking roof over a retail bay, office or warehouse costs you inventory, tenant goodwill and business days, so repairs need to happen fast and around the people inside.

See this service

More flat roofs & coatings services

Where we do this work most

Leak, storm damage or a roof that is simply getting old?

Call the roof line any hour. A real person answers, asks what you are seeing and sets the next step.

Roof trouble? Answered 24/7Call (754) 226-1055