Skip to content
Aurora ShieldRoofing Contractors 24/7Call the roof line(754) 226-1055

Inspections & care

Gutter installation and repair in Pembroke Pines, FL

Summer downpours overflow your gutters, pour off the roof edge and soak the fascia, the stucco walls and the soil right against your foundation.

  • Open 24/7
  • Based on Hiatus Road
  • HVHZ-rated materials
White aluminum seamless gutter and downspout on a stucco home with concrete tile roof, South Florida, dark rain clouds approaching
Answered 24/7
  • Real person on the line
  • Visit booked on the same call
  • Photos of what we find

Quick answer

Gutter installation and repair covers new seamless gutters, downspouts, re-pitching sagging runs, sealing leaking joints and fixing the fascia behind them. You need it when gutters overflow, pull away, leak at the corners or rot the wood behind them. Typical South Florida cost runs $8.60 to $17.40 per linear foot for new seamless gutters. Call (754) 226-1055, answered 24/7.

Gutter installation & repair around Pembroke Pines

South Florida rain arrives fast. A summer afternoon storm can drop an inch or more in under an hour, and an undersized or clogged gutter cannot keep up. Water then spills over the edge, splashes against stucco, pools at the foundation and soaks the fascia board. Over a few seasons that means rotted wood, stained walls and washed out landscaping.

Many Pembroke Pines homes with tile roofs have gutters only over doors and patios, or none at all, while others have sectional gutters that leak at every joint. Seamless gutters sized for heavy rain, with enough downspouts placed away from walkways, solve most of those problems. Tile roofs also need hangers positioned so water clears the tile edge cleanly.

When to call

Signs it is time for gutter installation & repair

Overflow in heavy rain

Water sheets over the front of the gutter during downpours instead of flowing along to the downspouts.

Sagging or pulling away

Gutter runs dip in the middle or separate from the fascia, leaving gaps where water falls straight down behind them.

Leaking joints and corners

Drips form at joints, end caps and corners even when the gutter itself is clear of leaves and debris.

Rotting fascia board

The fascia behind the gutter is soft, peeling or stained, usually from water running behind the gutter for years.

Washed out garden beds

Soil and mulch erode below the roof edge or downspouts, exposing roots and splashing dirt onto the walls.

Water at the foundation

Puddles stay near the foundation or on patios for hours after rain stops because the water is not carried away.

How the job runs

What happens on your roof

  1. 01

    Measure roof drainage

    We look at roof area, slope and where water concentrates to size the gutters and choose the best downspout locations.

  2. 02

    Repair fascia first

    Rotted fascia is replaced before gutters go up, since gutters need solid wood behind them to hang securely in high wind.

  3. 03

    Form seamless gutters

    Aluminum gutters are formed on site in continuous lengths to fit each run, removing most of the joints that tend to leak.

  4. 04

    Hang with proper pitch

    Gutters are hung on hidden hangers at close spacing with a slight slope so water moves steadily toward each downspout.

  5. 05

    Route downspouts away

    Downspouts get extensions or splash blocks that carry water away from the foundation, walkways and pool decks around the house.

Roof inspector photographing worn tile underlayment edges at the eave of a South Florida house
A typical day on a inspections & care job in Broward County.

Local factors that change this job

Pembroke Pines summer storms deliver intense rain over short periods, which is why gutter size and downspout count matter more here than in drier climates. Tile roofs dump heavy volumes of water at valleys, so those spots often need larger downspouts or diverters. HOA rules in many communities set gutter color and style. Hurricane winds also test how gutters are fastened, so close hanger spacing into solid fascia helps them stay put during storms.

Your options

Choices worth understanding first

5-inch seamless gutters

The standard size for many single-story homes. Formed on site to length and available in colors that match common HOA approved trim.

6-inch seamless gutters

Larger capacity for tile roofs, long slopes or valleys that release heavy water. Pairs well with oversized downspouts for summer downpours.

Repair and re-pitch

Fixing sagging runs, resealing joints and adding hangers on gutters that are still in good shape, which extends their useful life for years.

Gutter guards

Screens or covers that keep palm debris and leaves out of the gutter. They cut down cleaning, though fine debris still needs an occasional rinse.

Typical cost

What gutter installation & repair costs in Pembroke Pines

Typical South Florida range$8.60 to $17.40 per linear footfor new aluminum seamless gutters
5-inch seamless gutters, per foot$8.60 to $12.90
6-inch seamless gutters, per foot$11.40 to $17.40
Downspout with extension, each$115 to $245
Joint resealing and re-pitch, per run$95 to $260

Gutter size, total length, the number of corners and downspouts, and two-story height all affect cost. Fascia repair adds to the price when the wood is rotted. Guards are priced per foot on top. Simple repairs cost far less than new gutters. The final price is set after an on-roof look along the roof edges. Compare every service on the roofing price guide. Wondering where your roof sits on insurers’ age lists? Try the roof age check.

Questions

Gutter installation & repair questions we hear

They are not always required, but they help. Tile roofs shed large volumes of water at valleys and eaves, and without gutters that water erodes beds, splashes stucco and can reach doorways and patios. Many homeowners add gutters at least over entries, patios and valleys where the runoff is heaviest.

Sectional gutters are joined every 10 feet or so, and every joint is a possible leak. Seamless gutters are formed on site in one piece for each run, with joints only at the corners. They look cleaner, leak less and usually hold up better to the wind and rain of South Florida storms.

It depends on roof area, slope and gutter size. A common guideline is one downspout for every 30 to 40 feet of gutter, with extra ones at valleys on tile roofs. Too few downspouts is one of the most frequent causes of overflow during heavy afternoon rain in Pembroke Pines.

Gutters fastened with close-spaced hidden hangers into solid fascia hold up far better than those hung on old spikes. Extreme winds can still damage them, but a well secured system is much less likely to tear loose and damage the roof edge. We check the fascia and fastening before hanging any new gutters.

Related work

Often booked with this service

Fascia & Soffit Repair

Rotted fascia boards and sagging soffit panels let rain, rats and wasps into the attic, and they weaken the edge where your roof and gutters attach.

See this service

Roof Maintenance & Hurricane Prep

Hurricane season is coming and you know there are loose tiles, a lifted flashing and clogged gutters that the first big storm will find.

See this service

Roof Repair

A small roof problem in South Florida rarely stays small, because every afternoon storm pushes more water past the cracked tile, lifted shingle or tired flashing you cannot see.

See this service

More inspections & care services

Where we do this work most

Leak, storm damage or a roof that is simply getting old?

Call the roof line any hour. A real person answers, asks what you are seeing and sets the next step.

Roof trouble? Answered 24/7Call (754) 226-1055