Skip to content
Aurora ShieldRoofing Contractors 24/7Call the roof line(754) 226-1055

New roofs & replacement

Mobile home roofing in Pembroke Pines, FL for manufactured homes

Thin metal roofs on manufactured homes flex, rust and loosen at the seams, and a South Florida summer finds every opening within a few storms.

  • Open 24/7
  • Based on Hiatus Road
  • HVHZ-rated materials
Roofer installing white TPO membrane over insulation board on a double wide manufactured home roof in a South Florida park
Answered 24/7
  • Real person on the line
  • Visit booked on the same call
  • Photos of what we find

Quick answer

Mobile home roofing repairs, coats or covers the roof on a manufactured home. The common fix is a roof-over: a new TPO membrane or metal panel system installed over the old metal roof, often with insulation between the layers. Coatings suit roofs that are still sound. Typical South Florida costs run $2,140 to $14,620 per home. Call (754) 226-1055, answered 24/7.

Mobile home roofing around Pembroke Pines

Manufactured homes across Broward and Miami-Dade, from 55-plus parks near Pembroke Pines to communities in Davie and Homestead, often still carry their original low-slope metal roofs. Those roofs were built light. Over the years the seams open, the fasteners back out, and the panels rust around vents and the ridge cap. A leak also reaches the ceiling panels quickly, since there is little attic space to hold water.

We start by checking how the roof is framed and what condition the existing panels are in, then recommend a coating, a repair or a full roof-over. A roof-over adds a new surface without tearing off the old one, and it can add insulation that keeps the rooms cooler. We also ask about park or HOA rules early, since many communities approve roof materials and colors before work starts.

When to call

Signs it is time for mobile home roofing

Rust at seams and vents

Orange streaks or flaking metal around seams, vent stacks and the ridge cap show the old coating has failed and the steel is thinning.

Stained ceiling panels

Brown rings or sagging ceiling panels inside a manufactured home usually mean water is getting past a seam or a loose fastener above.

Booming in the wind

A roof that booms or rattles in afternoon gusts has loose panels or edge trim, which can peel back in a stronger storm.

Standing water after rain

Water that sits for days on a nearly flat roof speeds up rust and finds pinholes, especially along the center line of a double wide.

Patched over and over

Layers of roof cement and tape around the same spots mean the roof needs a lasting new surface, not another patch.

Hot rooms under the roof

Bedrooms that stay hot after sunset point to a thin roof with little insulation, which a roof-over with insulation board can improve.

How the job runs

What happens on your roof

  1. 01

    Check framing and approvals

    We look at the rafters or bow trusses, the existing panels and the edges, and ask about park or HOA approval rules before the scope is written.

  2. 02

    Choose coat, repair or roof-over

    Sound metal can be cleaned and coated. Worn metal is better covered with a new TPO or metal system, and we explain which fits your home.

  3. 03

    Pull the permit

    Roof-overs need a permit from the local building department, and the roofing product must carry the approval required in the HVHZ.

  4. 04

    Install the new roof

    We secure the edges, add insulation board or purlins where the system calls for them, and install the membrane or metal panels with new trim.

  5. 05

    Seal penetrations and inspect

    Vents, the AC stand and plumbing stacks get new boots or flashing, the inspector signs off, and you receive photos of the finished roof.

Crew craning pallets of new roof tiles onto a South Florida home during a reroof
A typical day on a new roofs & replacement job in Broward County.

Local factors that change this job

Manufactured home communities are common in western Broward and south Miami-Dade, and many park rules require board approval of roof color and material before a crew can start. Both counties sit in the High Velocity Hurricane Zone, so roof-over products need a Miami-Dade NOA or equivalent HVHZ approval, and the work is permitted and inspected. A roof-over does not replace the tie-down system that anchors the home to the ground. If we see loose straps or anchors, we point them out so you can have them checked.

Your options

Choices worth understanding first

TPO roof-over

A white TPO membrane installed over insulation board on top of the old metal roof. It reflects heat well, handles low slopes, and its seams are heat welded.

Metal roof-over

New metal panels set on purlins over the existing roof, often adding a slight pitch. It sheds water fast and suits parks that prefer a metal look.

Elastomeric coating

A reflective acrylic or silicone coating over cleaned, primed metal. It suits roofs with sound panels and limited rust, and it needs recoating every several years.

Seam and fastener repair

Resealing seams, replacing backed-out fasteners and patching rusted spots. It is the low-cost choice when the rest of the roof is still in fair shape.

Typical cost

What mobile home roofing costs in Pembroke Pines

Typical South Florida range$2,140 to $14,620per home
Seam and fastener repair, per visit$465 to $1,280
Elastomeric coating over metal, single wide$2,140 to $4,390
TPO roof-over with insulation board$6,280 to $11,930
Metal roof-over on new purlins$7,640 to $14,620

Price depends on single or double wide size, the condition of the existing metal, whether insulation is added, the roof-over system chosen, and permit and park requirements. Rusted framing or soft sheathing under the old roof adds cost. The final price is set after an on-roof look and given to you in writing. Compare every service on the roofing price guide.

Questions

Mobile home roofing questions we hear

In most communities, yes. Many 55-plus parks and HOAs ask for the material, color and contractor details before roof work begins, and some limit work hours. We can give you a written scope and product details to take to the board. The building permit is a separate step through the local building department.

On most manufactured homes, yes. Tearing off the original metal exposes the ceiling and insulation to rain, and the framing is often too light to work on safely with the roof off. A roof-over keeps the home dry during the job, adds insulation, and covers the old panels with a new, continuous surface.

A well secured roof-over closes the seams and loose edges where wind gets a grip, which helps the roof itself. It does not replace the tie-downs and anchors that hold the home to the ground. Those should be checked by a qualified installer, especially before hurricane season starts on June 1.

If the panels are still solid and the leaks come from seams, fasteners and small rust spots, a coating system with seam reinforcement often works well. If the metal is rusted through in many places or the roof flexes when walked, a coating only buys a short time and a roof-over is the better value.

Related work

Often booked with this service

TPO Roofing

Your flat roof bakes in the sun, ponds water for days after storms, and the old gravel or rolled roofing is cracking at every seam.

See this service

Silicone Roof Coating

Your flat or metal roof is worn but still dry underneath, and you want to add years of life without paying for a full tear-off.

See this service

5V Crimp Metal Roofing

You want a metal roof with Old Florida character at a lower price than standing seam, for a home, porch, cabana or detached workshop.

See this service

More new roofs & replacement services

Where we do this work most

Leak, storm damage or a roof that is simply getting old?

Call the roof line any hour. A real person answers, asks what you are seeing and sets the next step.

Roof trouble? Answered 24/7Call (754) 226-1055